Ceiling heating with Finnstrip panels

Radiant ceiling panels give out their energy as heat radiation, which spreads out on a limited area. This allows accurate targeting of heating power. Ceiling panels are especially suitable in applications, where it's necessary to heat a target without warming up the surrounding air.

The ceiling or wall mounted FinnStrip heating panels can be divided in three groups according to their surface temperature:

In low and medium energy panels, the energy is transferred from heating resistors into a panel, from which it spreads out into the room. The open infra-red heaters have got no protective panel, but the heat radiation from the resistors is reflected downward into the room by a concave reflector.

Low energy panels

FinnStrip EL/ENC low temperature panels (T<200 °C) are suitable for small and low rooms, and as additional heaters in front of windows.

 

Medium energy panels

In larger and higher rooms, more heating power is required. This is achieved through higher surface temperatures. FinnStrip EE medium temperature panels (T<450 °C) are available for various room heights.
 

 

Infra-red heaters

FinnStrip EIR and Heller infra-red heaters can be used e.g. on balconies and terraces. The high-power heaters are suitable for heating of large and high halls as well as for spot heaters in cold rooms.
 

Control

Ceiling heating is controlled with a room thermostat that measures the air temperature in the room. If also floor heating is used, the best result is achieved with a combination thermostat, which measures also the floor temperature.

Download Brochure

Download brochure 'Heating Panels'